MD380 PC Program Password

CPS standalone. Use this 1st if the following passwords do not work.

999999999
or
00000000

Use this as last 
It can happen that a “PC Programming Password”, set on the Tytera MD-380/Retevis RT-3 “CPS” programming software, is lost or forgotten. If that happens, there is no way to program the radio from your PC ever again.
However, there is a simple workaround:
  1. install the md380tools by Travis Goodspeed KK4VCZ; follow carefully his instructions for installation;
  2. issue the following commands:
    ./md380-dfu read mycodeplug.img
    printf '\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF' | dd conv=notrunc of=mycodeplug.img bs=1 seek=$((0x20a0))
    ./md380-dfu write mycodeplug.img
    
  3. when done, turn off the radio and back on again;
  4. your PC programming password is now empty;

CPS standalone. Use this 1st if the following passwords do not work.

MD380PassWordPass CPS Download

1 comment:

Wes White said...

I dont know how old this post is but ...THANK YOU!!!

Post a Comment

Thanks for your comments, Comments may take a day to show up

A discussion group about this subject.

Digital Ham Radio / Amateur Radio
DigitalHamRADIO@groups.io
https://groups.io/g/DigitalHamRADIO

Amateur Radio Users Support Group
AmateurRadio@groups.io
https://groups.io/g/AmateurRadio

Note: only a member of this blog may post a comment.